DIN Rail Mounted Terminal Blocks Accessories


  • Cross Connections
  • End Plates
  • End Brackets
  • Partitions
  • Marking Tags
  • Terminal strips
  • Test plug sockets
  • Cable marking sleeves
  • Group markings
  • Warning labels
  • Mounting rail support

End Brackets

  • Prevents terminal blocks from falling of the DIN Rail
  • Must be secured on each side. This is accomplished with end brackets screwed onto the rail
  • Two end brackets are necessary - one on each side of the continuous assembly designed
  • Thickness: 8mm



End Plates - Partition

  • Terminal Blocks are manufactured with one open end allowing side by side placement
  • An end plate is necessary for the last terminal block in the assembly enabling full enclosure

Cross Connectors

  • Cross Connectors distribute potentials within an assembly
  • Standard poles of 2, 3, 4, or 10 are available to satisfy your design requirements

Cable Marking Sleeves

  • Material: Flexible Plastic PVC for KG 1 - KG 2 (Resistant to flame)
  • Polyamide 6.6 for KE 1 -KE 2
  • Ambient Temperature: -30º C and + 70º C
  • Every packet contains only one type of letter, number or sign

Terminal Strips

  • Allows marking
  • Label slots are designed according to DB5 and DG 6/5 marking tags
  • Assembly of the terminal should be made with maximum 3mm width screw

Test Plug-Socket/Ins. Test Socket


Small Partition

  • The partition allows visual separation of circuits and for electrical separation due to adjacent cross connections

Group Markings


Marking Tags

  • Marking tags are used for circuit identification and easier troubleshooting
  • We have many numbers and letters available that will make your designed assembly unique
  • Horizontal markers for DIN Rail mounted horizontally and vertical for assemblies mounted vertically

Warning Labels


Mounting Rail Support